MCA Series

MCA Series
CO2 Adsorbers

For Dry, CO2-Free Air up to 20.5 lpm

Altec AIR Carbon Dioxide Adsorber-Dryers (MCA Series) are designed to remove CO2 and moisture from compressed air. This dryer uses dual towers with media beds featuring 13X molecular sieve in a pressure swing adsorption process. Adsorbed moisture and CO2 are vented to atmosphere while dry CO2-Free air is provided at the outlet port.

The dual tower adsorber/dryer design performs two essential functions in one process eliminating the need for an additional unit, reducing costs. The regenerative design provide continuous clean dry, CO2-Free air.

Standard Features:
  • Reduces CO2 to less than 1ppm
  • Reduces water vapor to less than 1ppm
  • Compact, lightweight design saves space
  • Easy to install
  • Continuous self-regenerative operation
  • Quiet
  • Operating pressure 50 to 120 psig
  • Outlet pressure 0 to 120 psig
  • 115 Volts AC, 6 watts, other voltages available
Optional Features:
  • Available Input Voltages
    • 120 VAC
    • 240 VAC
    • 12 VDC
    • 24 VDC
General Specifications:
MCA1 MCA2 MCA3 MCA4 MCA5 MCA6
INLET Flow:
(lpm @ 100 PSIG)
2.8 8.8 13.2 17.7 25.1 35.3
PURGE Flow:
(lpm @ 100 PSIG)
1.2 3.7 5.5 7.8 10.3 14.8
OUTLET Flow:
(lpm @ 100 PSIG)
1.6 5.1 7.7 9.9 14.8 20.5
*Capacities are based on inlet conditions of 70°F, 100% RH, and normal ambient CO2 levels of approximate 375 ppm
Inlet / Outlet Ports 1/8" NPT 1/4" NPT
Power Requirements
(Per Model Voltage Option)
115 VAC, Single Phase, 50/60 Hz
220 VAC, Single Phase, 50/60 Hz
12 VDC
24 VDC
Maximum Temperature 120°F ambient
Maximum Pressure 120 PSIG
Outlet CO2 Concentration Less than 1 ppm
Outlet Dew Point -100°F atmospheric dew point
Dimensions:
Weight
(oz)
Height
(in)
Width
(in)
Depth
(in)
MCA1 22 7.0 3.5 3.3
MCA2 24 10.3
MCA3 25 8.8 4.0 3.5
MCA4 30 10.1
MCA5 35 9.5 5.0 3.8
MCA6 50 11.4
MCA Series Dimensions
NOTES:
Recommended Filtration -
  • INLET: 5.0 Micron Particle Filter and 0.01 Micron Coalescing Filter w/ auto drain
  • OUTLET: 1 Micron Particle Filter
MCA Series Configuration

Need A Custom Sized CO2 Adsorber?

Contact Altec AIR for assistance selecting the right adsorber for your application.
All you need is the required dew point, operating pressure, and the required inlet or outlet flow rate.