In-Line Filters & Adsorbers

In-Line Filters & Adsorbers

Borosilicate Element, Silica Gel & Activated Carbon

Economical and compact, these In-Line Filters & Adsorbers are ideal for protection of pneumatic controls, portable analyzers, instrument air filtration and other analysis systems. Our disposable In-Line Filters and Adsorbers are ultrasonically welded into a see-thru nylon body. The see-thru body makes it easy to know when the filter needs to be replaced.

FDIL Filters:
FDIL In-Line Filter

The FDIL Filter's borosilicate micro fiber provides relatively high flow rates with low pressure drops which is critical in any analytical application. The PVDF binder creates a non-reactive surface which allows accurate sample analysis.

SDIL Filters:
SDIL In-Line Filter

SDIL uses silica gel to adsorb water vapor. The silica gel color changes from blue to pink when saturating, indicating time to replace.

CDIL Filters:
CDIL In-Line Filter

CDIL uses activated carbon to adsorb most C4 and heavier hydrocarbons, ketones, alcohols, esters, ethers, organic acids, chlorinated organic, freons, all aromatic hydrocarbons, and carbon disulfide.

Standard Features:
  • In-line compact design
  • Disposable
  • See-thru nylon body
  • Ideal for use with standard 1/4" O.D. compression fittings
Flows (SCFM) at stated line pressures (PSIG) with 1.5 PSIG pressure drop:
Pressure (PSIG) 1.5 10 20 30 40 60 80 100 125
Flow (SCFM) 0.6 0.9 1.3 1.6 2.0 2.7 3.5 4.2 5.7
General Specifications:
Filtration Efficiency
Removal of 0.01 Micron Particles = 99.99+%
Inlet / Outlet 0.25" O.D.
Drain Connection None
Maximum Pressure 125 PSIG
Volume 11.5 cc
Maximum Temperature 120°F @ 100 PSIG    230°F @ 0 PSIG
Spigot Diameter 0.25” O.D.
Body Diameter 1.00"
Spigot Length 0.79"
Overall Length 3.23"