Measuring & Alarm Instruments

Measuring & Alarm Instruments


Standard Features:

Digital Pressure Gauges

PDG100

PDG100

The latest technology in reliable, solid state circuitry and durable, high impact plastics, enables telephone maintenance craftsmen to take quick, accurate LCD display pressure readings at air dryer locations and at any pressure testing point in the cable network. Ranges of 0-30 PSIG and 0-100 PSIG at 0.01 PSIG resolution with 1.0% of full scale static accuracy.

Range
PDG30 0 - 30 PSIG
PDG100 0 - 100 PSIG

Deluxe Digital Pressure Gauge - 8290-50*

8290-50

8290-50

This 0 - 50 PSI* Deluxe Digital Pressure Gauge has a high ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The Gauge is battery powered and has an auto-shut off feature to conserve battery life which will last 2000 hours on average. A four button key pad allows easy access to features without the need to work through complex menus or difficult key combinations.


* Other Pressure Ranges available. Contact Altec AIR for more options.

Pressure Gauge (Low Pressure) - P06717

P06717

P06717

Enables telephone maintenance craftsmen to take pressure readings at air dryer locations and at any pressure testing point in the cable network. Range of 0-15 inches of water (0.35-0.54 PSIG).

Compressor Output Tester - 8310

8310

8310

The Compressor Output Flow Tester is designed to test the output flow performance of your compressor. For a normal reading, the gauge should be in the green zone. Below normal reading, the gauge will be in red zone. When the tester is in the red zone, your compressor will need to be removed from service for rebuild purposes or replacement. 0 - 25 PSIG range.

Portable Flow Rater - PPEC546

PPEC546

PPEC546

The Altec AIR portable flow-rater provides accurate and instantaneous flow rate of air entering cable at any location equipped with proper test valve. Gives flow readings from 0.2 SCFH to 20.0 SCFH. Has two 6’ lengths of clear vinyl tubing with easy snap-on air chucks.

Digital Humidity Meter - PH200

PH200

PH200

Portable, battery operated instrument to test relative humidity levels in pressurized cable. Can be used to test moisture levels at the air dryers. Included is the PH201 sensor which when used with the meter, permits the operator to sample moisture levels throughout the cable network. The units are housed in a durable carrying case.

Humidity Alarm Kit - PPEC560A

PPEC560A

PPEC560A

Can be installed in a dry air system to continuously monitor humidity levels. In the event of a high humidity condition, this kit will automatically give an audible and visual alarm and will simultaneously bypass the wet air to the atmosphere, preventing moisture from entering the cable system.