P4200W Series

P4200W Series Air Dryers

Up to 4200 SCFD


NEBS Compliant
CE Certified

Request a Quote Download Spec Sheet
Standard Features:
  • Accurate Humidity Sensing within ±0.1% RH
  • Digital Display of All Operating Parameters
  • Remote Real-Time Data and Alarm Reset Capabilities
  • SNMP Communication Compatible
  • Remote Access via Web Browser Interface
  • 8,000 Hour Maintenance Interval
  • Quietest Dryer on the Market
Optional Features:
  • 120 VAC or 220 VAC Models
  • Standard Pressure & Low Pressure Models
  • Imperial or Metric Units of Measure
Accessories:
  • Installation Kit (P011752)
  • 6-Month Maintenance Kit (P012314)
  • 8,000 Hour Maintenance Kit (P011471)
  • Cycle Module Interface (PVDW34)
  • 1/2” Tubing (PPEC430 - sold per foot)
  • 3/4” Hose (P07490 - sold per foot)
General Specifications:
P4200W P4200WLP P4202W P4202WLP
Output Capacity Normal: 2,600 SCFD (74 SCMD) Continuous
Maximum: 4,200 SCFD (119 SCMD) Emergency
Power Requirements
(15 Amp Service Recommended)		 110 - 125 VAC, 50/60 Hz 220 - 230 VAC, 1-Phase, 50/60 Hz
Running Amps 8.6 Amps 3.9 Amps
Outlet Pressure Range 5 - 20 PSIG
(35 - 138 KPa)		 0.30 - 10 PSIG
(2 - 69 KPa)		 5 - 20 PSIG
(35 - 138 KPa)		 0.30 - 10 PSIG
(2 - 69 KPa)
Outlet Air Relative Humidity Less than 2% RH
Compressor Type Two-Cylinder, 3/4 HP, Oil-less Type
Dehydrating Method Heatless Desiccant
Environment Operatating Temperature Range 40° - 85°F (5° - 30°C) Ambient
*Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C)
Noise Level 63 dBA at 3’ (1 m)
Heat Dissipation 3,500 BTU/hr 2,900 BTU/hr
Alarms Standard Alarms - Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication
Outlet Connections 1/2” NPT Female
Dimensions 21” D x 25.5” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H)
Weight 222 lbs (100 kgs)
Literature:
P4200W Series Specification Sheet
Guides:
P4200W Series User's Guide
P4200W Series Installation Guide
P4200W2 Series User's Guide (Metric)
for W2 models with Metric-specific Control Boards
Firmware Files:
*This is the latest production Firmware for our current version Control Boards ONLY.
Please Contact Altec AIR for all other Product Firmware requirements.
P4200W Series Firmware Files
SNMP Files:
P4200W Series MIB Files
for use with P4200W models using Firmware versions 0.5.4 or newer
CE Declaration of Conformity:
P4200W Series CE Declaration of Conformity